News
News

506HN-1 Deoxidizer — A Dedicated Solution for Deoxygenation of Ethylene, Propylene, and Other Gases

Release time:

Oct 16,2026


Ethylene and propylene are basic feedstocks for the petrochemical industry, while carbon dioxide is widely used in chemicals, food, metallurgy, and other fields. During the production, storage, and transportation of these gases, the presence of trace oxygen often affects downstream catalyst life, product quality, and even plant safety. Removing trace oxygen from these gases requires a deoxidizer designed for the specific application.

Our company’s Model 506HN-1 deoxidizer was developed precisely for this purpose. It is a metal/oxide-based chemisorption-type deoxidizer, mainly used for deoxygenation purification of ethylene, propylene, nitrogen, inert gases, carbon dioxide, and other gases.

 

Operates at Ambient Temperature, with a Relatively High Regeneration Temperature

Model 506HN-1 deoxidizer can operate directly at ambient temperature; its performance is even better when used at elevated temperatures, with a maximum operating temperature of 350°C. Its regeneration temperature is relatively high: activation or regeneration must be carried out at 420–450°C, making it suitable for units equipped with appropriate heating capabilities. In terms of performance, the residual oxygen content after purification can be controlled to ≤1 ppm, the oxygen removal capacity reaches 8–15 L/kg, it is suitable for operating conditions where the feed gas oxygen content is ≤1000 ppm, and its service life under normal operating conditions is ≥3 years.

 

Activation and Regeneration Are Repeatable, with a Clear Operating Procedure

Before use, Model 506HN-1 deoxidizer must be activated: load the deoxidizer into the reactor, purge the air from the system with an inert gas, then introduce pure nitrogen or an inert gas and raise the temperature to 420–450°C, holding for 1 hour; then introduce a nitrogen-hydrogen mixture containing 10–20% hydrogen to complete activation. After activation is complete, the gas to be purified can be introduced to begin deoxygenation. After oxygen absorption saturation, perform hydrogen reduction regeneration according to the same steps to restore activity for repeated use. A layer of inert ceramic balls about 20 cm thick should be placed on the top layer inside the deoxygenation tower, and the gas flows downward through the deoxygenation tower.

 

Serving Chemical Gas Purification Needs

In the petrochemical, coal chemical, and industrial gas fields, deep oxygen removal from gases such as ethylene, propylene, and carbon dioxide is an important step in ensuring the stable operation of downstream processes. With its specialized design, stable deoxygenation performance, and recyclable and regenerable mode of use, Model 506HN-1 deoxidizer provides a reliable route for the purification of these gases.

Share

Return
Security verification
Submission